|
|
| |
|
|
|
|
|
|
|
| Model: S0141 Loggers with USB adapter |
|
|
|
- Food and beverages industry (HACCP)
- Pharmaceutical industry
- HVAC (heating, ventilation, air conditioning, cooling)
- Building and energy management
- Research and development, Laboratories (GLP)
- Technological processes and warehouses
- Museums, archives, galleries
Loggers are designed for record of air relative humidity and temperature, optionally in combination with voltage signal 0-5V. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via serial interface RS232, USB or Ethernet by means of a proper adapter or GSM modem. |
| |
| |
 |
|
|
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
- Food and beverages industry (HACCP)
- Pharmaceutical industry
- HVAC (heating, ventilation, air conditioning, cooling)
- Building and energy management
- Research and development, Laboratories (GLP)
- Technological processes and warehouses
- Museums, archives, galleries
Loggers are designed for record of air relative humidity and temperature, optionally in combination with voltage signal 0-5V. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via serial interface RS232, USB or Ethernet by means of a proper adapter or GSM modem. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
- Location with no electric power
- Technological processes and laboratories
- Long term field measurement
Loggers are designed for record of voltage signal 0-5V (optionally 0-10V) or current signal 0-20mA. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via serial interface RS232, USB or Ethernet by means of a proper adapter or GSM modem.
- Included calibration certificate from the manufacture-Comet
- Variability of connection to the computer-USB, RS232, Ethernet, GSM modem
- Fast data transfer to the PC (full memory of 32 000 readings for approximately 30s)
- Permanent connection to the PC enabled, data is possible to download even during logging
- Large dual line display with special symbols, switchable
- Optional display of minimum and maximum measured values (reset of min/max memory from PC or magnet)
- Dual level alarm is enabled for each channel, alarm is indicated by bilking of the value on the LCD display or LED
- Two alarm modes: instant or with memory (detected alarm is indicated till alarm memory is cleared)
- Robust watertight case, easy installation, locking enabled
- Low power consumption-battery life up to 7 years, indication of remaining battery life, easy battery replacement
- Standard temperature sensor is Pt1000
- Combination of measurement of temperature and RH with two user calibrated voltage signals 0-5V
- Also logging mode enabled, when logging runs only, if measured values are out of adjusted alarm limits
- Each logger is possible to describe with text of maximum 32 characters
- Each channel is possible to describe with text of maximum 16 characters
- Password protection is enabled to prevent unauthorized manipulation.
|
| |
| |
|
|
|
|
|
