Our attractively styled pear leads allow access to the call system when residents are away from the call point. The lead is available in 2M &4M lengths and the right angle jack plug reduces the chance of damage by furniture movement. Each unit comes fitted with a clip fastener, which allows the unit to be attached to clothing or bed sheets if required. All call points generate a standard call should the pear lead be removed from the jack socket.

The PS1 Plug in Pull Cord converts a normal call point into a unit which may be activated by pull string. The unit plugs into the jack socket and has a 30cm cord, terminated with a ‘pull’. This a ideal in toilets where a ceiling pull switch has not been fitted, or where is it out of reach.

The PM1 is a standard pressure mat which plugs into the call point jack socket and activates a standard call when pressure is applied to the mat. The unit should be placed under a mat or carpet as it is not designed to be walked on directly. The unit comes supplied with a four metre lead terminated with a right angle jack plug. The surface area of the mat measures 300x600 mm.

The S2 Air Switch is ideal for environments where water may be in contract with the system, such as it uses air to trigger the call. The S2 Air Switch is fitted with a clip fastener so it can be attached easily to a shower curtain or towel. The unit will generate a standard call should it be removed from the jack socket.

The breath switch allows even the most severely handicapped access  to the call system. It operates in a similar way to the pear leads and the air switch, generating a standard call, and plugs into the jack socked on all call points. It is supplied with detachable mouthpieces which may be sterilized. 

The TIR4 Infra Red Trigger allows calls to be made from any location covered by the system. It operates by triggering the local IR call point when the button is pressed, allowing the exact location of the resident to be displayed. The TIR4 triggers require the use of L722 Call Points which have built in infra red receivers, to be trigger the system.

The Ceiling pull switch can be used to allow access to the system from en-suite rooms and bathrooms/toilets. It is mounted to the mounted to the ceiling and has a long cord with a ‘g’ loop an the end, confirm a call has been successfully generated.

The PIR1 unit detects movements within an area covered by the infra red receiver. It can be used to monitor a resident’s bed and alert staff when a resident is on the move. The actual bed is “masked” out of the range of the receivers range will activate a call, a trigger the call point.

Alphanumeric pagers can be connected to the system with the L747 Universal Interface. The pagers display all made on the system as they would appear on the display unit, showing the exact location of each call in full alphanumeric text. The system can be programmed so different pagers respond to different calls, making it possible to either zone the building by area, or by call type. There is also a day/night mode available allowing pagers to be programmed to respond to different calls at set times during the day or night.

The CMS Lite Call Management Software allows you to record and store all Intercall system activity on your personal computer. Giving you immediate access to information, it is easy to access the call history of a serident, keeping you in charge of your home. Staff pagers can also be controlled from your computer, allowing free text messages to be sent to individual pagers.