|
|
| |
The Intercall 600 is the UK’s most popular addressable call system. Coupling flexibility with ease of use, it provides a complete solution that out performs practically all other systems available today. Being an addressable system, it requires only one two core connection to network devices and operates at a safe 12voltsDC. The room descriptions may be programmed on or off site as required. |
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
The Intercall 600 is the UK’s most popular addressable call system. Coupling flexibility with ease of use, it provides a complete solution that out performs practically all other systems available today. Being an addressable system, it requires only one two core connection to network devices and operates at a safe 12voltsDC. The room descriptions may be programmed on or off site as required. |
| |
| |
 |
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: L622 Standard Call Point |
|
|
|
|
A call point is required for every individual call location on the system. It features five levels of call, multi-color re-assurance LED & “call follower” sounder. The industry standard jack socket will accept pear leads, pressure mats, portable radio triggers and a host of other triggering devices. Options which must be specified when ordering include: magnetic key reset (L622M), emergency call only & non-latching call point for telephone ring detectors etc |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: L733 DK Door Monitoring Point |
|
|
|
| The L733DK Door Monitoring Point can be used to protect fire doors, exit doors and other sensitive areas. The unit has an isolated key-switch in place of the jack socket, which can be used by authorized personnel to isolated the unit and prevent it from activating the alarm. The L733DK activates an “Emergency” call as standard and can be reset with a single press of the reset button. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: L628/L618 LCD Display Units |
|
|
|
| A display unit is required in every location where calls are to be shown and the alarm is to sound. It features LCD display with backlight, multi-level adjustable alarm, day/night volume control, “priority” alarm tone for specific call locations, configuration menus and an output which can be connected to trigger external equipment. All displays work identically but can be configured on site to operate independently. The L628 Large Style Display Unit illustrated, operates in the same way as the L618 Standard Display Unit but Features 30% larger LCD mounted in Intercall style housing. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
| Slave call points are used to cover several beds in one room or ward where each individual beds does not require a separate identity on the call system. Units must be wired back to a standard call point to provide the reset and to generate the call identity. Slave call points can only generate a “standard patient call” from either the call button or pear lead socked. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
|
|
|
|
Overdoor lights are an optional item normally positioned above the door in a corridor to indicate the status of the call point(s) within the room. The L746 can also be used to monitor several call point addresses for end of corridor indication, or as a “follow me” light. Each unit is fitted with twin ultra-bright LEDs which mimic the reassurance indicator on the call points. The L746S unit operates in the same way as the standard overdoor light but has the addition of an integral sounder. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: L714 Remote Sounder with Relay |
|
|
|
Remote sounders are used in areas where an audible alarm is required to attract attention, but no indication of call location is required. The sounder is similar in operation to a display unit with a multi level alarm, but has limited zooning facilities. Any assistance or emergency call on the system will over-ride the standard call tone. The unit is fitted with a relay that provides normally open and normally closed “dry” contacts, which can be used to trigger auxiliary devices. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: L717 & L737 Power Supply |
|
|
|
The L717 Power Supply provides the main power to the system. It requires a main supply connection and it houses the backup battery, required to safeguard the system in the event of a main failure. The power supply stores all the text programming information and can also used to configure the system if a laptop is connected. The L737 Booster Power Supply unit is designed to increase the permitted number of units and quantity of cable allowed on any one system. It works by re-producing the signals made by the power supply, and several booster units may be connected as required. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: Printers And Alphanumeric Pages |
|
|
|
| Printers and Alphanumeric Pages can be connected to the system with L747 Universal Interface. The printer provides a permanent printed record of all system activity together with date and time. Pagers can be configured to display calls made on the system activity together with date and time. Pagers can be configured to display calls made on the system as they would appear on the display unit. This allows staff to carry on with their work without having to worry about missing calls. Pagers can also be specially configured to only receive certain calls, or calls at certain times of the day. |
| |
| |
|
|
|
| |
| |
| |
|
|
|
|
|
|
|
| Model: CMS Lite Call Management Software |
|
|
|
The CMS Lite Call Management Software allows you to record and store all Intercall system activity on your personal computer. Giving you immediate access to information, it is easy to access the call history of a resident, keeping you in charge of your home. Staff pagers can also be controlled from your computer, allowing free text messages to be sent to individual pagers. |
| |
| |
|
|
|
|
| |
| |
| |
  1/2   |
|
